TR1008 - Stacker at BWAY in Trenton, New Jersey

Job Description:

JOB DESCRIPTION



Duties and responsibilities:

• Accurately and legibly fill out a Production Report.
• Correctly set-up sheet travel from oven exit to Stacker,
• Continuously check for any defect on raw and coated plate.
• Notify the Line Operator immediately of any defects noted. When material needs to be Held For Inspection notify the Line Operator, QA technician, and the Shift Supervisor.
• Take and record Second Gauge dry film weights (if applicable) five (5) readings per sheet, a minimum of three (3) sheets per skid.
• Inform Packers of proper Packaging and Stenciling requirements.
• Check the machine at the start of each shift, to ensure Safety Equipment is in working order (guards, micro switches, etc.) that belts, clips, rollers, and bumpers are clean and in good condition and that the sheet is being delivered to the Stacker without denting or scratching.
• Use care when standing on unstables (Roller Conveyors etc.)
• Keep your area clean, swept, free of spills, debris, and tripping hazards.
• Perform minor repair and maintenance to keep the line in good running order.
• Assist Wash-up and Coater Operators during Start-ups and Shutdowns.
• Straighten bent wickets. Notify Operator/Pressman of bent wickets when you have a jam up.
• When a job is completed on Presses, neatly band Press Waste Sheets for removal by Forklift Operator. Each skid should be labeled with a skid ticket that identifies Customer, Sheet Size and End Use. Tickets should be wired to band in a manner that makes it accessible when skids are stacked.
• When a job is completed, or when stack becomes too large, bend scrap sheets for removal by Forklift Operator.
• Must observe General Plant Rules and Regulations, Plant Health and Safety Rules, Attendance Policy and all published and distributed Standard Operating Procedures.

Requirements:

• Must be able to read, write, and understand a work order to determine the inside, the outside, need for additional passes and for packaging and stenciling instructions.
• Must be able to understand arithmetic to include decimals, fractions, addition, and subtraction.
• Must serve an eighteen (18) month apprenticeship.

Physical Requirements:

• Must be able to install skids into stacker approximately six (6) times an hour, each skid weighing between thirty (30) and fifty (50) pounds.
• Requires the exertion of physical strength to start heavy loads of plate (skid metal) in motion on a roller conveyor and into a Load Turner with the aid of a pry bar this must be done approximately 6 times per hour over the course of an eight (8) hour shift. requires exertion of physical strength to start heavy loads of plate skid of metal in motion out of a low Turner, with the aid of a pry bar. This must be done approximately six (6) times per hour over the course of an 8-hour shift.
• Requires exertion of physical strength to start heavy loads of plate (skid of metal) in motion out of a Load Turner, by turning a crank handle. This must be done approximately six (6) times per hour over the course of an eight 8-hour shift.
• Requires constant standing.

Working Conditions:

• Plant performs lithography, on metal sheets, in a manufacturing environment. The use of coatings such as enamels and varnishes pose a fire hazard. In addition, there is a presence of fumes and heat.

Safety:



Our mission is to promote a positive safety attitude in the plant. Adherence to the rules will result in a safer work environment and a reduction of injuries and lost time incidents. It is not possible to cover every conceivable situation. These rules are designed as a guideline. Always use common sense and make your as well as your co-worker's safety the highest priority. Work in a safe and efficient manner and wear the proper ear, eye, and hand protection when required.



ABOUT US



Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development?


Mauser Packaging Solutions is that company.


Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.


At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment.


Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us!


Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Apply Now